Firmware Update - TECshow NAVIGATOR SMART RDM Manual De Usuario

the PAN wheel to browse all the steps. You can
also press INSERT to insert a step.
7. When all the steps are edited, press the number
button to save and exit (step 3 same button).
Run Scenes
1. Pess SCENE (indicator on).
2. Press the number button(s) to activate the
scene(s).
Run Chases
1. Press and hold "PgDn/Clear" 3s, clear manual
move fader output.
2. Press CHASE (indicator on)
3. Press the number button(s) to activate the
chase(s). Maximum 5 chases can be output simul-
taneously.
4. Press RUN MODE to select a run mode:
- AUTO: Chases run in the sequences of
the numbers.
MANUAL: Rotate the PAN wheel to run
-
step by step, forward or backward.
- MUSIC: The chases will be activated by
sound. To adjust the sensitivity of sound
activation in MUSIC mode, press and
hold and then rotate the TILT wheel.
When two or more chases are running si-
multaneously, the chase that is adjust-
able shows a blinking LED indicator. To
adjust another chases, press the corre-
sponding number button for 2 seconds
till its LED indicator blinks, then, it is
ready for adjustment. The last activated
chase will always be adjustable.
Move "wait timer" fader can to adjust
chase wait time; move "fade time" fader
to adjust chase fade time.
Controller runing output priority is: manual move fader >
movement>scene>chase,
Means is if mnaual move fader, change dmx output, will
override movement/ scene/ chase output.
- For example: activated ctivation FIX-
TURE 1(LED ON manual move fader 2 (R
fade), change the channel output(out
put not vlaue 0), Will override move
ment/ scene/ chase output same chan
nel output. So if a chase in runing, use
have manual control fixture fader out
put, chase same channels will no out
put, because mnaual move fader output
priority is than chase output.
Fade In/Out Time of the Color Ch.
Press "PgUp" button and hold then move "wait time" to
adjust the fade in/out time of the color channels. Each fix-
tre can be set individually fade in/ fade out, Fade in/out
time can be set enabled/disabled (refer to "01. Patch fix-
ture".)

Firmware Update

•
Create a folder named "show-design3" in the
root directory of your USB memory stick.
•
Copy the update file "show_design3.upd".
•
Insert the USB memory to the USB port.
•
Power off Show Design 3.
•
Press and hold REC + BLACK OUT + RUN MODE.
•
Power on Show Design 3 and wait for about 3 sec
till the LCD display shows "PRESS ANY BUTTON TO
UPDATE"
•
Release REC + BLACK OUT + RUN MODE.
•
Press any button, then, it will start updating.
•
Once the update is completed, power off Show
Design 3 and power on again; Then, the updated
firmware is now in service.
P. 11
NAVIGATOR SMART RDM
ENGLISH VERSION