Specifications; Supplied Accessories - Sony BRU-SF10 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Specifications

System
Video signal
Synchronization
Aspect ratio
Video S/N
Input/output connectors
Camera input
Video output
External sync input/output
Control input/output VISCA RS-232C IN: Mini DIN
Control signal format
Audio line output
10
GB
Specifications
1080/59.94i, 1080/50i,
720/59.94p, 720/50p (switched
with the VISCA FUNCTION
switches)
Internal/external synchronization
automatically switched
16:9 (wide mode)
50 dB
LC Duplex Fiber connector (1)
D-sub 15-pin (1)
RGB: 0.7 Vp-p (no sync,
at 75-ohm termination)
1 Vp-p (±0.3 V, tri-level sync,
at 75-ohm termination)
Component :
Y: 1 Vp-p (±0.3 V, tri-level
sync, at 75-ohm termination)
Pb/Pr: ±350 mVp-p, 75-ohm
terminated
HD/VD Sync: 1 Vp-p, 75-ohm
terminated
Tri-level Sync: ±300 mVp-p,
75-ohm terminated
EXT SYNC IN: BNC type (1)
Tri–level signal ±300 mVp-p
SD sync 2.0 V max. (with
automatic termination)
EXT SYNC OUT: BNC type (1)
8-pin type (1)
VISCA RS-232C OUT: Mini
DIN 8-pin type (1)
VISCA RS-422: 9-pin type (1)
9600 bps/38400 bps
Data: 8 bit
Stop bit: 1
Phono jack, left (1)/right (1)
Maximum output level:
2.8 Vrms
Output impedance 1 kilohms or
less (Reference impedance
1 kHz)
General
Power requirements DC 12 V
Current consumption 1.3 A
Power consumption 15.6 W max.
Operating temperature
0 ºC to 40 ºC (32 ºF to 104 ºF)
Storage temperature –20 ºC to +60 ºC (–4 ºF to 140 ºF)
Dimensions
210 × 86 × 240 mm (w/h/d)
3
(8
/
8
excluding protruding parts
Mass
Approx. 2.0 kg (4 lb 6.4 oz)

Supplied accessories

AC power adaptor MPA-AC1
(100 to 240 V AC, 50/60 Hz) (1)
Power cord (1)
DC-cord secure connection attachment (1)
RS-232C connecting cable
(Sony Part No. 1-590-879-34) (1)
RS-422 connector plug (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
1
1
× 3
/
× 9
/
inches)
2
2
Tabla de contenido
loading

Tabla de contenido