Orbegozo ADR 71 Manual De Instrucciones página 19

ADR 71 ADR 94 ADR 97
• Use only utensils recommended by the manufacturer to defrost or clean.
• Do not use the appliance in a home with any ignition sources that are in continuous operation
(for example, gas appliances in operation or an electric heater in operation).
• Do not perforate any components in the refrigerant circuit.
• The refrigerant gas may be odorless.
• An area greater than 9 m2 is required for installation, use and installation of the device.
• Possible leaks of refrigerant gas in homes without ventilation could cause an fire or possible
explosion if the refrigerant comes into contact with electrical heaters, estufas or other ignition
sources.
• Keep the appliance in place to avoid mechanical failures.
• You can only work in refrigerant circuits for authorized persons who are competent and
accredited by an agency that certifies them for refrigerant handling, in conformity with the
legislation of the sector.
• All maintenance and repairs that require the assistance of your qualified personnel must be
carried out under the supervision of specialists in the use of flammable refrigerants.
BEFORE FIRST USE
Please leave the product sitting outside the box for 24 HOURS before plugging it in.
The product may have been tilted or placed upside down during shipping. Leave The productsits for 24
hours so the oil in the compressor can settle from the move, Not doing so can affect the performance or
life span of the product.
19