Electro Depot VALBERG CYCLONIC S3 Instrucciones De Seguridad página 20

Aspiradoras de escoba y manuales
Idiomas disponibles

Idiomas disponibles

Regulatory instructions
CAUTION:
Always unplug your unit and let it cool down
completely before each use, changing an accessory, cleaning
it or putting it away.
• Any thorough cleaning and/or maintenance-related operation
or accessory-changing intervention must be carried out with
the unit's power plug unplugged or after the power supply has
been cut off.
• Should a malfunction occur that cannot be resolved by the
information provided in the unit's instructions for use, please
contact the after-sales service.
• To preserve the unit and avoid dangerous situations, never
vacuum up very fine dust particles – such as plaster or concrete
– or liquids, wet substances, etc. Never vacuum up the following
substances: explosive or flammable gases, liquids and dust
(reactive dust), in addition to magnetic, toxic, flammable or
combustible reactive metal dust (e.g. aluminium). Do not vacuum
sharp, hot or incandescent objects at temperatures above 40°C,
such as cigarettes or hot ashes.
• There is a risk of explosion with temperatures above 40°C.
The waste may appear as if it has cooled down on the outside,
while in fact, still being very hot on the inside. Do not use to
vacuum ashes.
• Do not vacuum harmful dust. It is prohibited to use the unit in
areas where there is a risk of explosion.
• To avoid damaging the unit, do not block the air inlet or outlet.
Check that the suction surface of the filters, air inlets and air
outlets are completely dry. Otherwise, the vacuum cleaner could
become damaged.
• If your vacuum cleaner is equipped with a socket to power
another device, please respect the maximum power indicated.
Only connect a device with reinforced (double) insulation; i.e.
doesn't require an earthed socket.
• Do not use the unit if the plug or power cable is damaged, in the
event of a malfunction or if the unit has been damaged in any
way. Have it inspected and repaired by an after-sales service
centre. No repairs should be carried out by the user.
20
EN
loading