ErgoAV ERMML4-01B Manual De Instrucciones página 37

Piezas y herrajes suministrados para el paso 2
Nota: El tornillo de retraso se muestra en tamaño real
A1 x 4
Anclas de pared
x 4
A2
10X60mm
Plaque murale
Tornillo de retraso
5/16X2 3/4 pulg
Este taco es SOLO para
paredes de hormigón. No
los utilice en paredes de
yeso o madera.
02 x 1
PRECAUCIÓN!
1.
OR
Use a stud finder (not included) to locate
wood studs or use an awl (not included)
to verify the edges. Mark the edge and
center locations.
XXX-XXXXX-XX Rev00
Nota:
1. Antes de colgar la plata de pared [02] en
la pared, debe remover las cubiertas de
arriba y abajo. Instale la cubierta luego de
instalar la placa de pared [02].
2. Préstele atención a las posiciones superior
e inferior de los paneles de pared; la
instalación inversa está prohibida.
36
Complete Step 1 in owner's manual before mounting wall plate.
16" (406.4mm)
2. 3. 4.
03
Position the Wall Plate Template [03] at Drill pilot holes using a 7/32" (5.5mm) Install the Wall Plate [02] using Lag Screws
your desired height and line up the holes diameter drill bit. Make sure the depth [A1]. Tighten the Lag Screws [A1] is pulled
with your stud center line. Level the Wall is not less than 2 3/4" (70mm). firmly against the Wall Plate [02]. DO NOT
Plate Template [03] and mark the holes. over-tighten the Lag Screws [A1].
Level Pencil Electric Drill
(Not Included) 2 3/4" (70mm）
(Not Included) (Not Included)
Questions or Need Help
ErgoAV Customer Care Phone: (877) 419-7832 [email protected]
24in (609.6mm)
Plantilla de pared
03 x 1
A1
02
1/2" (13mm)
Level Socket Wrench
(Not Included) (Not Included)