Idiomas disponibles
Idiomas disponibles
• Flags
The flags are a temporary visual aid for your dog during the training process. They enable your dog to visualize the area where
he can move freely and the boundaries he must not cross.
We recommend installing the flags at the inner edge of the warning zone at short intervals. Do not place the flags at the
antenna wire.
Once your dog is familiar with the boundaries, the flags can be gradually removed.
• Layout of your installation
Before starting the installation of your pet fencing system, it may be useful to draw a layout of the installation.
Once the installation is completed, note the location of the wire connectors on the layout you drew for future reference. In
case of connection default, you will find them more easily.
Diagram 4 – Sample installation
AUTOMATIC SYSTEM
Antenna wire
As soon as the animal wearing a collar
enters the protected area, he is warned by
2 m between
beep sounds.
both wires
If he continues to move forward, towards
Warning
the antenna wire, the collar emits
By twisting the outward strand with the inward
area
stimulations.
strand, wave emission is blocked and the
animal can move freely within this zone.
The antenna wire is placed on the ground,
buried or raised on an existing fence.
Stimulation
For the system to function, the wire must
area
form a continuous loop.
Transmitter
Both wires (inward and outward) must be
Twisted wire
spaced 2 meters apart.
• Activate/deactivate the transmitter
• Activate: connect the transmitter to the power supply by plugging the AC adapter into the power jack on the transmitter
and into a wall outlet. Indications appear on the LCD screen, the transmitter is On.
• Deactivate: disconnect the AC adapter from the wall outlet. The LCD screen goes out, the transmitter is Off.
NOTE: do not connect the transmitter to the power supply before connecting the antenna wire to the antenna socket. The wire
break alarm would alert you to a connexion default (ref. § Safety features).
When you disconnect the transmitter, the boundary settings are memorized. Next time you will activate the transmitter, the
settings will be the last selected.
26
guide canifugue MIX FUG1033 IndB.indd 26
02/04/2019 11:01
