Idiomas disponibles
Idiomas disponibles
3. h
anDling
3.1 m
achIne
The machine is delivered adjusted with the
drive configuration specified in the order.
Keep the machine clean!
After an extended stop of the machine (> 48h),
and a speed of use > at 5000 rpm.:
Gradually increase the speed in increments of
1000 rpm. ≈ 15min in steps.
During a prolonged stop of the machine, do not
leave a tool holder in the spindle.
3.1.1 c
hangIng the drIve confIguratIon
(Z
)
gIng
form
Drop front sheet metal.
Loosen the screws.
30
/o
PEration
By applying a 5 mm allen key anticlockwise, lower the
/ b
-
motor with the belt pulley.
elt exchan
Remove the motor pulley.
Remove the pneumatic jack and the rotating union.
