Idiomas disponibles
Idiomas disponibles
USER MANUAL
MICROLUX 2 DIAGNOSTIC SYSTEM INSTRUCTIONS FOR USE
Warranty registration at www.addent.com
MICROLUX 2 TRANSILLUMINATOR
Items included in box: Microlux 2 unit, Light guide, 2 AAA batteries, sample protective sleeve
and this instruction manual.
!
Not Sterile. The following Microlux 2 accessories are patient contact parts and are
provided in a non-sterile condition:
• 2mm, 3mm and Pedo Glass Fiber Optic Light guides
• Lighted Mirror Attachment
• Endo-lite, Perio Probe and Proximal Carries stainless steel attachments
They must be sterilized prior to initial patient contact and between patient applications. Refer
to instructions for a) Cleaning and b) Sterilizing.
The Endo-lite, Perio Probe and Proximal Carries plastic fibers are SINGLE USE patient
contact parts. They must be disinfected prior to patient contact. Fibers must be disposed of
after use. Refer to instructions for
c) Disinfecting.
!
CAUTION: Do not autoclave the Microlux 2 LED hand piece. Doing so will
damage the unit and void your warranty. Refer to instructions for
c) Disinfecting.
!
CAUTION: Do not immerse the Microlux 2 LED hand piece in solution. Doing
so will damage the unit and void your warranty.
!
CAUTION: Do not autoclave the Endo-lite, Perio Probe and Proximal Carries
stainless steel attachments with the plastic fiber insert in place. Doing so will
damage the attachments.
CAUTION: The light guide is fragile – handle with care. Insert the glass light
!
guide into the aluminum nose cone with firm pressure. The stainless steel
ferrule at the end of the light guide should be covered by the aluminum nose
cone and a slight click may be heard. To remove, rotate slightly and pull on
the light guide at the same time.
INTENDED USE
The Microlux 2 Transilluminator is intended to be used by a dentist or dental professional as an
adjunct to traditional oral examination. It is used for trans- illumination of the teeth, using high
intensity LED light, thus aiding clinical dental examinations. Trans-illumination helps to visualize
crown fractures, caries and root canal orifice.
OPERATION AND FIRST TIME USE
Note: The Microlux 2 accepts all original Microlux light guides.
Operation: Press the blue on/off button to turn the unit on. The LED turns on in 'High Intensity'
mode. If the button is pressed a 2nd time the light output is reduced to approximately one-third, or
'Low Intensity' mode for better photos. When the button is pressed a 3rd time the unit turns off.
Low battery indicator: The LED will blink twice when unit is powered up and automatically
switches to low intensity mode to conserve power.
Auto Turn Off: The Microlux 2 unit will automatically turn itself off after 7 minutes of use to con-
serve battery power.
Constant Light Output: Built in regulator circuit produces constant light output regardless of
battery charge level.
2
