Machine Introduction - edenox DV-211-S Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1. MACHINE INTRODUCTION

1.1 Introduction to machine
1.2 Important safety information
1.3 Specifi cations Chart
1.1
INTRODUCTION TO MACHINE & MODELS
The purpose for which this equipment has been designed is to be built into a self-service buffet and is specially
conceived for the display and service of hot food, maintaining the food in the best temperature condition
during the period of time of the service. Said conditions will depend on the initial temperature of the products
when displayed and the environmental conditions of the premises. In no case can this technical appliance
be used to heat food.
The panels have dimensions equivalent to 2, 3, 4 and 5 GN 1/1 depending on the model and that of the
panel with a heat screen equivalent to 2 GN 1/1.
The glass panel is vitro-ceramic, providing unbeatable physical qualities with regards to mechanical
resistance, resistance to stress and thermal fatigue, and an almost inexistent thermal dilatation.
The technical cabinet in the lower part includes the electricity panel, which includes the regulating
thermostat.
1.2
IMPORTANT SAFETY INFORMATION
The in-situ installation and start-up of this appliance must be carried out by qualifi ed technical personnel.
The appliance must be only repaired by qualifi ed personnel. Please contact your distributor and do not
attempt to open this appliance.
If the appliance is not going to be used for long periods of time, make sure it is empty, cleaned and
disconnected from the mains electricity supply.
The appliance working temperatures may be affected by the ambient temperature and the location of the
appliance.
Make sure that external sources do not infl uence the appliance that may prejudice its performance (direct
sources of cold or similar).
This appliance is made of stainless sheet steel and there are risks of cutting inherent in its design and to being
made of thin sheet steel. Please take extra special care when handling it and cleaning the same.
The inside of the technical cabinet has intrinsic risks such as electricity, cutting, and burns.
WARNING: Never place cold food or containers straight from the fridge or freezer on the hot plate, as
the glass may be damaged due to thermal shock.
Keep to the recommendations made by the food manufacturers.
CAUTION: The vitro- ceramic glass is very resistant, but it is not unbreakable and can be damaged by
hard or sharp objects that are pressed on the surface with force. In the event of noticing any chipping,
cracks, fracture or other damage to the glass do not use the appliance and contact your distributor
Technical Assistance Service.
Do not allow children to handle the appliance under any circumstances.
1
edenox.com
ENGLISH
Tabla de contenido
loading

Tabla de contenido