Idiomas disponibles
Idiomas disponibles
Cable connection
he configuration information on the back of the monitor varies by product model.
Read the following before connecting the product.
1. Before connecting the product, be sure to check the two ports of the supplied signal cable, as well
as the shape and position of the ports on the product and external devices.
2. Before connecting the product, be sure to remove the power cord or power adapter from the
product and external devices to prevent damage to the product due to short circuits or overcurrent.
3. After all signal cables are properly connected, connect the power cord or power adapter back to the
product and external devices.
4. After completing the connection, be sure to read the manual to familiarize yourself with the product
features, precautions, and other information needed to use the product properly.
HDMI: Using an HDMI cable to
connect the product's HDMI port to
HDMI
the PC's HDMI OUT port.
DP : Please link DP cable of LED to the
port named DP IN at the back of the
DP
LED Monitor.
USB-A*2/USB-B:Usb-a/Usb-b is used
to connect the mouse and keyboard
USB
Panel control
M: Menu key,display the option of entering menu OSD and its submenus
: Up key,or situational mode
: Down key, or Game centre
E : Exit key,or enter signal source
: Power key,turn on or off the power
EARPHONE OUT: Use a headset plug to
connect to the EARPHONE OUT jack.
EARPHONE
DC IN 24V: Use the adapter to access
the port, the power supply of this
interface only supports DC 24V,
DC IN
use the matching adapter to access,
please consult the authorized service
center for the non-original adapter.
Type-C: Use a Type-C cable to
Type-C
connect to the Type-c jack
4
