Idiomas disponibles
Idiomas disponibles
5. There are two ways of installation.
Installation way one: attach the top of the hood to the cabinet by drilling 4 pcs screws (ST4x14)from both sides
of range hood to the cabinet. See Pic 7.
Installation way two:attach the top of the hood to the cabinet from the top of rear frame to the cabinet with 4 pcs
screws (M4x30),4 pcs M4 spacer and 4 pcs nuts. See Pic 8.
9. Connect the wire of LED lights and switch back to the glass panel assembly. Assemble the glass panel
assembly back to the hood with the screws.
10. After the hood has been installed,install the exhaust pipe to the outlet opening. See Pic 9.
11. Plug the power cord into the wall outlet.
Pic 7
Pic 9
26
Pic 8
