Domo DO7117DR Manual De Instrucciones página 32

4. Insert the plugs into the 4 holes. Attach the wall fasteners to the wall using the oval plates and the
long screws.
5. Use the extendable wall mounting brackets to attach the appliance to the wall fasteners, then adjust
these to the desired position and secure with the short bolts.
6. Click the cover plates onto the bottom of the towel rack for the finish.
WALL MOUNTING WITHOUT DRILLING HOLES
1. Remove the wall mounting brackets from the wall fasteners.
2. Attach the wall mounting brackets to the towel rack using the longest bolts and their nut. Note: the
brackets have a top and a bottom side. When you can see the screw thread in the rear hole that is
the bottom side. Choose the desired position where you want to attach the 4 corners of the towel
rack. We recommend that you attach the mounting brackets on the highest and lowest heating pipe,
with a horizontal distance between them of 35 to 42 cm.
3. To avoid danger to children, this appliance should be installed so that the lowest heating pipe is at
least 60 cm above the floor. Hold the appliance exactly level (horizontally) against where you want
to mount it and mark 4 ovals on the wall for each corner.
32
DO7117DR