Idiomas disponibles
Idiomas disponibles
7
5
1
9
3
10
I
First connection with the PC
The NACON GC-100XF controller is also a Plug-n-Play device. In other words, the necessary
driver software will be automatically installed when the controller is first connected to your
computer. Here is the detailed procedure to follow:
• Turn on your computer, wait for it to start, and go to your Windows desktop.
• Find a USB port on your PC that's not in use and connect the USB cable from your NACON GC-
100XF controller to it.
• Windows will detect the new device and, after a few seconds, start installing the appropriate
drivers. The process will be indicated by a small icon in the task bar.
• Installation takes more or less time depending on the speed of your system. At the end of the
process, the following message will appear: "You can now use your GC-100XF.»
I
D/X switch
Modern PC games and your controller communicate in different ways. Your GC-100XF
supports the two most common communication modes: DirectInput and XInput.
Sometimes, a game only supports one of these two protocols. As these cannot be executed
simultaneously, your GC-100XF is equipped with a D/X switch (10) which lets you select
one of these two protocols, thus guaranteeing you the possibility of playing all games.
Note: after changing the protocol, please wait a few moments for the controller to switch to the new
protocol.
EN /
8
6
4
2
