Create Cyclone Force Manual De Instrucciones página 8

ASSEMBLY OF THE VACUUM CLEANER
Make sure the vacuum cleaner is not connected to the charger before you start the as-
sembly:
1. Take the vacuum cleaner and accessories out of their packaging.
2. Attach the floor brush to the metal tube. Once assembled, connect these parts to
the main part of the vacuum cleaner. You will hear a "click" when the extended tube is
assembled correctly.
USE OF ACCESSORIES
Please remove the charger before exchanging accessories. If the vacuum is charging or
has a low battery, it will not work.
1. The handheld vacuum can be used directly with the two-in-one suction nozzle and the
long flat suction nozzle.
2. This vacuum cleaner has three suction power modes.
3. Press the speed control button to change the vacuum's operating mode. The degree of
suction will automatically adjust according to the size of the particles.
BATTERY MOUNT
1. Align the guides on the battery with those
on the vacuum.
2. Once in place, slide the battery until you
hear a "click".
3. To remove the battery, press the button lo-
cated at the top and pull it out.
E NGL I SH
8
INSTRUCTIONS FOR USE
2