Bluetooth Function - Daewoo DSK-610 Manual De Instrucciones

Using the Remote Control to Operate the Unit.
Aim the remote control directly at the
remote control sensor (IR) on the front
panel. Don´t put any objects between
the remote control and the system while
operating the unit,.
To get your remote control working
initially, pull the clear tab from the battery
compartment located at the bottom of
the remote.
AUX-IN
1. Connect the Aux In cable to the Aux-in jack. Connect the other end of the cable
to an MP3 player or other audio source.
2. Press the "STANDBY" button to turn the speaker on.
3. Press the "MODE" button to switch to Aux-in mode.
4. Use the controls on the connected device to begin playing music.

Bluetooth function

1. Power on the unit, press "MODE" button on the remote control to switch to the
Bluetooth mode.
2. Activate the Bluetooth function of your mobile phone (or other device you want
to connect). Your Bluetooth device must search and nd the device name "DSK
610".
3. Select "DSK-610" and the speaker will automatically connect with your phone
(some mobile phones need you to input the PIN code that appears on the
mobile phone screen.
4. If the Smart Phone/tablet cannot nd the unit or can´t pair, please power o and
after power on and repeat the above steps.
5. The tower speaker will automatically reconnect with the last connected device.
6. If you manually turn o the Bluetooth function of the Smart Phone or the Smart
Phone far away from unit (over 10 m,), the connection between the speaker
and the Smart Phone will be lost and the unit will enter the Bluetooth standby
mode.
USB port for playing MP3
Power on the unit and insert a USB Flash Drive into the USB Port, ensuring the plug
is fully and correctly inserted.
The speaker will play music from the USB automatically or press "MODE" button
on the remote.
EN
11