Idiomas disponibles
Idiomas disponibles
SET "0" OPERATION:
Measuring range: 0 ~ 90°
Press (MOD) button ,changes to 90°×4 state.
L-press button (SET) to start setting preset value,let LCD display 0°, after
setting the intended preset value, L-press button (SET) to quit.
Let the square close to measuring face of the bases and the blade, press
(ZERO/ON) button set "0",the LCD will display the state of the illustration A.
When measurement acute angle(0 ~ 90°), can read data directly from the
LCD; when measurement obtuse,the degree of the LCD plus 90°to get the
degree of the workplace.
Measuring range: 0 ~ 180°
Press (MOD) button ,changes to 180°×2 state.
L-press button (SET) to start setting preset value,let LCD display 90°, after
setting the intended preset value, L-press button (SET) to quit.
Let the square close to measuring face of the bases and the blade,press
(ZERO/ON) button set "0",the LCD will display the state of the illustration B.
When measurement 0 ~ 180°, read data directly from the LCD.
Angle
Fig. A
16
