EN: FOLDING BABY BATH TUB WITH STAND AND CHANGING PAD;
ITEM NUMBER: 6012; ITEM NAME: GARDA
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
Not following the safety requirements can threaten the safety of your child.
WARNING!
•Babies and young children are at risk of drowning when being bathing.
•Stop using the bath stand when the child starts to stand up on their own.
•Do not allow other children (even older) to substitute for an adult
• WARNING! To avoid scalding by hot water, position the product in such a way to prevent your child from reaching the
source of water.
•Always check the water temperature before bathing the child. The typical water temperature for bathing a child is
between 35 °C and 38 °C.
•Ensure the level of water is not higher than your child's navel.
•Always check the stability of the product before use.
•The bath tub should only be used on a flat, dry surface.
• Do not use the product if any components are broken or missing.
•Do not use replacement part or accessories other than those approved by the manufacturer.
•Maximum weight of a child placed on the changing pad is up to 11 kg.
•Use this changing pad only with the bath tub it was designed to be used with. Dо not use the changing pad with any
other bath tub. Using this changing pad with other bathtubs may cause serious danger.
•All the parts of the changing pad should be always properly locked and regularly checked.
•Do not use the changing pad without placing it on the bath tub.
•Assembling, folding and unfolding the bath tub should only be done by an adult.
SEE FIGURES PD-A and PD-B:
PD-A: 1.Foldable bath tub; 2.Changing pad; 3.Steel stand frame (left) with fixed part of the changing pad; 4. Support leg with wheel (A);
5. M5*40 screw; 6.Support leg (A); 7. Support leg (B); 8.Lower support frame of the stand; 9.Accessory basket; 10.Side metal tubes for
fixing accessory compartment; 11.Upper support frame; 12.Steel stand frame (right) with fixed part of the commodity shelf;
13.Accessory compartment; 14.Support leg with wheel (B); 15.Support leg with wheel (A); 16.Drain-pipe; 17.Button
PD-B: 1. Support legs (A,B)*2 pcs; 2.Folding bath tub*1 pc; 3.Accessory basket*1 pc; 4.Stand side tubes*2 pcs; 5.Bath tub fixers (A,B)*2
pcs; 6.M5*40 screw*4 pcs; 7.4*16 screw*16 pcs; 8.Screwdriver*1 pc; 9.Upper support frame*2 pcs; 10.Lower support frame*2 pcs;
11.Draine pipe + Button*1 pcs; 12.Steel support tube with fixed part of the changing pad*1 pc; 13. Steel stand frame with fixed part of
the accessory compartment.
Read the instructions carefully before you start the assembly of the product. Follow exactly the individual steps for assembly and
inspect after each action, whether you have fixed the individual parts tightly.
1.Step 1 - Figure1: Assembly the support frames of the stand together with the changing pad and accessory compartment. Turn the
changing pad on a flat surface and place the bath on it so that the fixed covers of the bath are facing you. Using a screwdriver, unscrew
the four covers (bath fixings).With gentle pressure, insert the steel support frame together with the attached changing pad into the
groove on the left side of the bath tub. Next, insert the steel support frame together with the accessory compartment into the bath
groove on the right side. The four bath fixings are inserted into the corresponding letter (A; B) of the bath groove and fixed using a
fixing screw and screwdriver.
2.Step 2 - Figure 2: Fixing the upper support frames. Placing the support legs on the stand. Fixing the changing pad: Insert the upper
support frame into the corresponding holes of the stand in the direction of the arrows. Press until you hear a clicking sound and the
spring-loaded buttons come out of the holes provided for them. The two support legs marked with the letter A are inserted into the
corresponding holes marked with the same designation and gently pushed down until the spring-loaded buttons come out of the holes
provided for them.
WARNING AND RECOMMENDATIONS FOR SAFE USE
WARNING! DROWING HAZARD!
ATTENTION! *Children have drowned while bathing. *Children can drown
in as little as 2 cm of water in a very short time. *Always remain in
contact with your child during bathing. *Never leave your child
unattended in the bath, even for a few moments. If you need to leave
the room, take the child with you. *Always ensure the suction cups are
well adhered to the bath tub.
PRODUCT PARTS
ASSEMBLY STEPS
14
