Idiomas disponibles
Idiomas disponibles
•
Tap "Add via Code" to start configuring your device to the network
via the code.
•
Follow the prompts to scan the barcode on the device.
•
Tap "Set Now" and connect to the device's Wi-Fi in the system settings
following the app prompts.
•
After successful connection, tap Next to start network configuration.
3) Manual Configuration
•
Manual Configuration must be completed within 10 minutes of
device startup. Otherwise the system will need to be restarted.
•
If you fail to add the device via the QR code, you can manually
select the device type to add the device's Wi-Fi.
•
Tap to select the device type.
•
Select the corresponding device model and tap 'Add'.
•
Tap "Set Now" and connect to the device's Wi-Fi in the system settings
following the app prompts.
•
Follow the prompts to complete Bluetooth pairing, and then start
network configuration.
App Troubleshooting
"Device not found"
"Network configu-
ration failed"
The APP cannot
establish connection
with the device.
- Incorrect Wi-Fi
password.
- Wi-Fi is 5GHz.
- Wi-Fi network signal
is too weak.
14
- Ensure the device is turned on.
- Ensure the connection is not
pending. If the LED indicator is
flashing, reset the devices Wi-Fi.
- The device is too far away from
your router. Adjust your router's
position or install a Wi-Fi extender
at home to ensure Wi-Fi coverage
for the device.
- The device is too far away from
your router. Adjust your router's
position or install a Wi-Fi extender
at home to ensure Wi-Fi coverage
for the device.
