Idiomas disponibles
Idiomas disponibles
UNDER / ON-TABLE MOUNTING
There are two recesses on the top and bottom of the enclosure, each with two M4 threaded
holes, for mounting underneath or on top of the table. Screw the two enclosed mounting plates
to the top or bottom side using the enclosed M4 countersunk screws. Now the amplifier can be
fixed in the desired position (see illustration, mounting screws not included in delivery).
For tabletop mounting, the four rubber feet must be removed beforehand.
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, maintained. The maintenance requirement depends on the intensity of use
and the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating
hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may
be limited in the event of defects resulting from inadequate maintenance.
CARE (CARRIED OUT BY USER)
WARNING! Before carrying out any maintenance work, the power supply and, if possible,
all device connections must be unplugged.
NOTE! Improper care can lead to impairment of the unit up to and including destruction.
1. Housing surfaces must be cleaned with a clean, damp cloth.
Make sure that no moisture can penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
make sure that damage to the device is prevented (e.g. fans must be blocked in this case).
14
