Bang-Olufsen Beolab 8 Guia Del Usuario página 7

7
B E A M W I D T H C O N T R O L
With Beolab 8 you can change the width of the sound for optimised sound for
different experiences.
WIDE mode is for more "Social" or passive listening situations. This will ensure that
there is a more equal distribution of the direct sound across a wider listening area
in the room.
NARROW mode is for the "Sweet spot" or active listening and delivers precise
stereo imaging for active listening. It is able to reduce the amount of energy in the reflections
off the side walls.
The LEDs on the front will inform you which mode Beolab 8 is in. The information can also be
found in the B&O app.
L I S T E N I N G M O D E S
Listening Modes consists of a wide range of controls that allows you to adjust the sound
to your personal preference or to optimize for the current listening experience. Listening
modes can be selected and customised in the Bang & Olufsen App on your Beolab 8 product
page. Listening Modes on Beolab 8 are equivalent to Speaker Presets on a Bang & Olufsen
television. You can save your own personally adjusted settings as Listening Modes, so they
can easily be accessed again, or use the predefined settings designed for Beolab 8: Optimal,
Speech and Social.
For each Listening Mode you are able to define the following control parameters:
Beosonic
Advanced digital sound algorithms developed by our acoustics team allows you to explore
different audio spaces by simply moving the circle around.
Beam Width Control
Adjust whether the Beam Width in a Listening Mode is set as WIDE or NARROW.
Active Room Compensation
Active Room Compensation gives you an optimal tuning of your Beolab 8 according to the
room it is placed in. You are able to select whether this tuning filter is turned on or off to a
given Listening Mode.
The microphones in Beolab 8 muct be switched on while Active Room Compensation is being
performed.
Speaker Preset
Speaker Presets are used when Beolab 8 is connected to a Bang & Olufsen television, to set
up speaker groups.
Select the Speaker Preset number as the identification number for adding the speaker
groups in the television menu, which you can configure in the menu under Listening Mode –
Advanced.
Each preset is uniquely identified by a numerical ID in the range (0-99). This number is sent
from the television through Powerlink or Wireless Powerlink data when a Speaker Group is
selected.
Speaker preset number is the Listening mode identification number and it is selected in the
Speaker Group in the television menu.
Beolab 8