Deltaco SH-LFL01 Manual Del Usuario página 4

ENG
Thank you for choosing Deltaco!
Installation
Plan your installation, by considering where
you want to install the floodlight, and consider
the max angle and max range of the motion
sensor.
To install, mark the location with a pen using
the floodlight's premade holes. Make pilot
holes with a smaller drill before making the
final holes, to prevent cracks. Drill the holes.
Insert the plugs, then screw the screws to
attach the floodlight.
Insert the power plug to a wall outlet. You are
now ready to connect the product to the app.
Reset
To reset the device, turn the device on and off
3 times, until it starts flashing.
4
Install and use
1. Download and install the app "DELTACO
SMART HOME" from Apple App Store or Goo-
gle Play Store on your mobile device.
2. Launch the app "DELTACO SMART HOME".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the device does not flash: Reset the device.
If the device is flashing: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
The device name will be used by Amazon Alexa
and Google Home.
Add service to Google home
Add the device to google home.
Add the service "DELTACO SMART HOME".
Add device to Amazon Alexa
Use the menu "Skills & Games" and search for
"DELTACO SMART HOME". Enable the app and
login. Use "discover" to add the device.
Cleaning and maintenance
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly, replace it
with a new device.
Clean the outside of the device using a soft
cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: [email protected].