Idiomas disponibles
Idiomas disponibles
FREIDORA DIGITAL SMART
SMART FRYER
of the Program are 180
time and temperature freely by using Time +/- and Temperature +/- button.
You can also press any function icon to cook different food. When press the function icon,
the lights flickered, then press
time and temperature (
temperature freely by using Time +/- and Temperature +/- button.
(1). The temperature control range is 50-200°C, every click on the + / - temperature will
increase or reduce 10°C. At 200°C, ， press the "+", will loop back to a temperature of
50°C, press the "-" at 50°C temperature will cycle back to 200°C.
temperature control, temperature digital display will
flashing during working), after
of setting;
The adjusting time range is 1 to 60 mins. every click on the + / - time will
(2).
increase or reduce 1 min. At 60 min if you press "+", the time will cycle back to
01 min,. At 01 min , if you press "-", the temperature will cycle back to 60 min.
In the process of time control, time digital display will
flashing during working), after
setting.
3. Start, pause/stop
After select function ,set the right time and right temperature, press
start to flicker, after BEEPS sounds, machine
machine working, press
stop flickering.during the machine working,
BEEPS,
machine stop working,and machine back to standby mode.
Noted:
(1).
During working, you can take frying tray out, stop working,and you can
check
cooking result or add more food, machine continue to work on the
program if pull in the frying tray.
(2). P
ower cut or unplug during working,machine stop working,all light off,
machine continue to work on the program when power on or plug in again.
3,during work, five red lights flicker on by one all the time.
4. End of program
Heating element stop working when working time is done ,show 00 min,motor
continues to work, buzzer warning. motor continues to work 1 min,cooling
machine, then machine enter the standby mode.
, 15 min respectively, at that time you
°C
unit start to work. Every function have its own default
As shown in the table)
flickering
flickering
after BEEPS sounds,machine stop working,
,
INSTRUCTION MANUAL
. Customer can adjust the time and
flicker
3 times, the temperature has been done
flicker
3 times, the time has been done of
start to work. During the
press
,
5
can adjust the
In the process of
on the screen (not
on the screen (not
, the
after
