Igloo ICF18 Manual De Instrucciones Breve página 15

ICF18, ICF32, ICF40, ICF60, ICF80DZ
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mold developing within the device.
A
NOTICE! Damage hazard
• Check that the voltage specification on the data plate corresponds to that of
the energy supply.
• Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to a DC outlet, disconnect the cooling device
and other power consuming devices from the battery before connecting a
quick charging device.
• If the cooling device is connected to a DC outlet, disconnect the cooling device
or switch it off when turning off the engine. Otherwise the battery may be dis-
charged.
• The cooling device is not suitable for transporting caustic materials or materi-
als containing solvents.
• Do not place the cooling device near naked flames or other heat sources
(heaters, direct sunlight, gas ovens, etc.).
Risk of overheating!
• Ensure at all times that there is a minimum of 50 mm (1.97 in) ventilation on all
sides of the cooling device. Keep the ventilation area free of any objects that
could obstruct the air flow to the cooling components.
Do not use or store the cooling device in closed compartments or areas with
none or minimal air flow.
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against heat and moisture.
• The device shall not to be exposed to rain.
2 Intended use
The cooling device is suitable for cooling food. The cooling device is designed to be oper-
ated from a DC on-board power supply of a vehicle or boat, from a DC auxiliary battery or
from an AC power supply.
The cooling device is suitable for camping use.
The cooling device is intended to be used in applications such as
• Staff kitchen areas in shops, offices and other working environments
• Farm houses
EN
Intended use
15