Idiomas disponibles
Idiomas disponibles
Getting Started
1. Insert two batteries (1.5 V AAA) into the thermometer. Indoor
temperature will be displayed.
2. Insert two batteries (1.5 V AAA) into the wireless sensor.
3. The thermometer will pair with the sensor within 1 minute and
outdoor temperature will be displayed.
Note: Only use 1.5 V alkaline batteries; do not use rechargeable 1.2 V
batteries. Lower voltage may cause both of the units to not function.
Make sure to observe the correct polarity of the batteries according
to the drawing at the bottom of the battery compartment.
If the thermometer is not showing data from the outdoor sensor,
check:
• Distance of the thermometer or sensor from sources of inter-
ference such as computer monitors or TV sets. The distance
should be at least 2 meters.
• Whether the thermometer or sensor is not in the proximity of
metal objects and frames (such as window frames).
• Whether the thermometer's functionality is not affected by
other devices using a similar frequency (wireless headphones,
wireless blinds control, gate control, garage door control etc.),
or wireless devices used in the immediate vicinity.
• We recommend placing the sensor on the north side of the
house. The range of the sensor may decrease substantially in
areas with large number of obstacles.
• The sensor is resistant to dripping water; however, it should not
be exposed to sustained rain. Do not place the sensor on metal
objects as this will reduce the transmission range.
Outdoor and Indoor Temperature, °C/°F Temperature Unit Setting
Outdoor temperature value is shown in the top half of the display
in the OUTDOOR field.
Indoor temperature value is shown in the bottom half of the display
in the INDOOR field.
Press the °C/°F button repeatedly to switch between °C and °F unit of
temperature (use a thin dull object, such as a paper clip).
4
