Idiomas disponibles
Idiomas disponibles
Switching power supply/Battery charger
EN 60950-1
The IPS12060G switching power supply/battery charger has been designed and manufactured to the
highest standards of quality, reliability and performance adopted by INIM Electronics. INIM Electronics
guarantees that the components selected for this product will operate properly within their specifications
when the environmental conditions outside the enclosure comply with Class 3k5 (EN 60721-3-3).
The IPS12060G unit provides a regulated 13.8V and 2.5A maximum current by means of the +V
and -V terminals.
The outputs are overload, short-circuit and reverse polarity protected.
The unit can be equipped with an optional thermal probe (ProbeTH see the INIM catalogue) which
is capable of maintaining the battery charge current at the appropriate level for efficient battery
charging.
TECHNICAL SPECIFICATION
Mains supply voltage
Absorbed current
Output voltage
Operating output voltage
Battery shutdown tension
Maximum output ripple
Maximum output
for external load
current
for battery recharge
Connectable battery
(or equivalent with case flame class
UL94-V2 or higher)
Unreplaceble protection fuse (F1)
Maximum internal resistance of bat-
tery
Operating temperature
Isolation class
Dimensions (W x H x D)
Weight
A
Mains input terminal board
B
Battery connector
C
Output terminal board
D
Output connector
E
Thermal probe connector
F
OC output connector
Serial port connector
G
(reserved)
H
I
Ground fault signalling jumper input
J
Anchor screw hole (Ø 3.25mm)
IPS12060G
providing 3.7A @ 13.8V
230V~ (-15%/+10%)
50/60Hz
0.5A (max)
13.8V
from 9 to 13.8V
9.5V
1%
total
3.7A
2.5A
1.2A
12V – 7Ah or 17Ah
YUASA NP-12 FR
T 3.15A 250V
2.7 Ohm
from -5 to +40 °C
138 x 42 x 87 mm
0.450 Kg
AC Input
230V ~ 50/60 Hz
BAT-, BAT+
+V, -V
RTH, FAULT, -V, +V
NTC
STATUS
SERIAL
LED indicators
J
H
(±1%)
G
I
D
C
B
E
F
A
J
STATUS
F
GND OC2 OC1
+V
I
