Control Panel - Celexon Economy eAdjust-71121 Manual De Instrucciones

CONTROL PANEL

The table moves up
The table moves down
Attention: The respective button must be held down until the desired height
is reached.
TROUBLESHOOTING
Error
The table does not move down even
though the button is pressed continuous-
ly.
The table does not move up even though
the button is pressed continuously.
After continuous operation, the table can
no longer be moved.
Up
Solution
Check all cable connections and make
sure that every cable is connected cor-
rectly. Also check whether the table is
connected to the power supply.
Check all cable connections and make
sure that every cable is connected cor-
rectly. Also check whether the table is
connected to the power supply. Make sure
that the table is not overloaded (max.
load 70 kg).
As soon as the table motor has been in
continuous operation for more than 2 mi-
nutes, it switches to overheating protec-
tion. This protection mode lasts up to 30
minutes. If the table still cannot be moved
after 30 min, disconnect the table from
the power supply for a further 10 min.
then plug it back in.
Down
8