Craftsman 917.388570 Manual Del Usuario página 11

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
eEPORE A rER EVE.V EVE.Y EVE.V eEPO.E
EACH EACH 10
2 .OURS 100
SCHEDULE
use
use .ou.s O.SEASO..ou.s STORAGE
Check for Loose Fasteners
_
Clean / Inspect Grass Catcher *
Check Tires
_
Check Drive Wheels
Clean Lawn Mower ****
M Clean under Drive Cover ***
O Check Drive Belt/Pulteys
***
_
Check / Sharpen / Replace Blade
R Lubrication
Clean and Recharge Battery **
Check Engine Oil level
Change Engine Oit
Clean Air Filter
Inspect Muffler
Replace Spark Plug
Replace Air Fitter Paper Cartridge
Empty fuel system or add Stabilizer
,/
lI_,2
14
t/
* (if so equipped)
** Electric_Start mowers
*_* Power_Propeiledmowers
**** Use a scraper
to clean under dock
1 _Change more often if operating under a heavy load or in high outdoor temperatures,
2 - Service more often if operating in dirty or dusty conditions,
3 _Replace blades more often when mowing in sandy soil
4 _Charge 48 hours at end of season,
5 _And after each 5 hours of use.
GENERAL
RECOMMENDATIONS
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence.
To receive
full value from the warranty, operator must
maintain unit as instructed in this manual.
LUBRICATION
CHART
Wheel
adjuster (on
each wheel)
Some adjustments will need to be made
periodically to properly maintain your unit.
ine oil
At least once a season, check to see if
you should make any of the adjustments
described
in the Service and Adjustments
section of this manual.
• At least once a year, replace the spark
plug, clean or replace air filter element
and check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance
schedule in this
manual.
BEFORE EACH USE
• Check engine oil level.
° Check for loose fasteners.
LU BRICATION
Keep unit well lubricated
(See "LUBRICATION
CHART").
Rear door
hinge
Handle bracket mounting pins
_
sPray lubricant
See
ENGINE
in Maintenance
section.
IMPORTANT:
Do not oil or grease plastic
wheel
bearings.
Viscous
lubricants
will
attract dust and dirt that will shorten the life of
the self-lubricating
bearings. If you feel they
must be lubricated, use only a dry, powdered
1 1graphite type lubricant sparingly.
loading