Idiomas disponibles
Idiomas disponibles
• To avoid danger in the event that the appliance gets damaged, contact our Customer Service
team or send the appliance to one of our authorised service centres for replacement, and do
not attempt to replace it without our authorisation.
• WARNING! Read all the safety information and instructions. Failure to follow the safety
information and instructions may cause electric shock, fire and/or serious injury.
• Ensure that water cannot get inside the appliance. Never immerse the appliance in water or
other liquids.
• Do not use the appliance if the mains plug, mains cable or any other part of the appliance is
defective or damaged.
• Do not remove the mains plug from the socket by pulling on the mains cable.
• Never insert or remove the mains plug with wet hands.
• The plugs of electrical appliances must be compatible with the socket. Never change the plug.
Original plugs and matching sockets reduce the risk of electric shock.
• The appliance must not be connected to a timer switch.
INTENDED USE
This appliance is used for keeping feet warm. The product is not a medical product and is not
suitable for therapeutic purposes. Use the product only for the purpose it is intended for. The
manufacturer accepts no liability for damage caused by unintended use. Any modification to the
product may negatively impact safety, cause hazards and invalidate the warranty.
Only suitable for domestic use; not for commercial use.
UNPACKING INSTRUCTIONS
Open the box and remove the product. After unpacking, please check the product for damage
and to ensure it is complete. Subsequent complaints cannot be accepted.
OPERATION
• Plug the control unit into the socket of the foot warmer and connect it to the mains socket.
• The LED indicator shows the four temperature settings.
• Press the On/Off button to switch on the foot warmer and select the desired temperature using
the heat setting button.
• The appliance switches off automatically after 90 minutes and the LED display goes out.
• To put the foot warmer back into operation, press the On/Off button and it will turn back on
at the last temperature set.
1.
2. On/Off button
Heat setting button –
choice of
4 temperatures
9
www.DEUBAXXL.de
