MPM MOP-20M Manual De Instrucciones página 17

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
 Keep your children safe: do not leave any parts of the
packaging readily accessible (i.e. plastic bags, cardboard
boxes, polystyrene inserts, etc.).
 WARNING! Never let children play with plastic film
or bags. Choking/ asphyxiation hazard!
 WARNING! Oils and fats may burn when overheated.
Please be careful!
APPLIANCE DESCRIPTION
1.
Red caution lamp (power supply)
2.
Green caution lamp (thermostat)
3.
Upper cover
PRIOR TO THE FIRST USE:
ATTENTION! Before cleaning the heating plates make sure the appliance is unplugged!
1. Prior to the first use of the roaster, thoroughly wash the heating panels of the roaster with the
cloth moistened with warm water and thoroughly wipe with dry cloth thereafter.
2. Stand the appliance on a flat, stable and dry surface which is resistant to high temperatures.
3. Before toasting for the first time, the hot plates must be properly conditioned by running them
hot. Place the toaster on a firm, dry, level and smooth surface, plug the power cord to the mains.
Leave it running for 10 minutes. Next, unplug the toaster from the mains and wait until it cools
down completely. The hot plates may smoke slightly during this process. This is natural and will no
recur during further use.
NOTE! Bread may burn! Therefore the appliance must not be used near or below curtains and in
vicinity of other combustible materials!
NOTE! The working surfaces of the roaster are heated up to extremely high temperatures! Touch
the holders only!
USE OF THE ROASTER
NOTE! When opening the cover, proceed carefully owing to hot damp from the area under the
heating panels!
1. Oil the heating plates (5) with butter, margarine or other fat.
2. Insert the plug into the socket – red caution lamp (power supply) (1) and green caution lamp
(thermostat) (2) will go on. Close the cover of the appliance (3).
3. Prepare the sandwiches.
4. When the green indicator lamp (2) will go off, open the cover by pulling the latch (4) and put the
sandwiches on the heating panels. Gently close the cover and clamp with clip (4).
5. When checking the condition of sandwiches in course of their roasting, open the cover carefully
owing to hot damp escaping from the both sides of the roaster!
6. Open the cover and remove roasted sandwiches using wooden or plastic spatula.
4.
Clip
5.
Heating panel
EN
17
loading