S
R
2
FIG. 13
13. To attach the door to the unit, slide the Hinge arms onto the plates as shown in FIGURE 13.
Follow directions in FIGURE 13A to adjust the doors.
T
x 1
FACE
FRAME
ZC
T
FIG. 14
14. Attach the Door Stop (T) to the inside of the face frame, opposite the hinges about three inches
down from the top using #6 x 1/2" Philtruss Screws (U) in the predrilled holes.
Attach a Pad (ZC) to the front of the door stop.
15. Attach the Handle (Y) to the doors with #8 x 1" Machine Screws (Z).
Hinge
Arm
Q
DOOR
U
x 2
ZC
T
U
U
3
2
3
1
FIG. 13A
ZC
Z
Z
FIG. 15
Side adjustment 4mm (5/32")
To move the door towards the side
panel, loosen screw '1' and tighten
screw '2'. To move the door away
from the side panel, loosen screw
'2' and tighten screw '1'
Depth Adjustment 4mm (5/32")
Loosen screw '2' (Just one turn),
adjust door to desired position,
re-tighten screw.
Height Adjustment 4mm (5/32")
Loosen screw '3', adjust door to
desired position, re-tighten screw.
Z
x 1
Y
744W — Page 9
x 2
