Idiomas disponibles
Idiomas disponibles
8.3. Troubleshooting
Problem
Possible Cause
No blue or red light
Not charged
from Omnilux Clear
No blue or red light
Device connected to
from Omnilux Clear
an electrical outlet
LEDs DO NOT
turn OFF after 10
Device is faulty
minutes
LEDs flicker
Omnilux Clear is not
continuously during
fully inserted into
treatment
controller
If the actions suggested fail to fix the problem, or the problem reoccurs, and
your device is within the warranty period please return to your provider.
DO NOT attempt to investigate any further.
DO NOT attempt to modify the device in any way. The
Omnilux Clear Device has NO parts you can repair yourself.
9.0. Labelling
The labelling supplied with the device contains the following information.
Date of manufacture
•
•
Catalogue Number and Batch Code.
•
Operating environment
•
Manufacturers Information
10.0. Recycling
The outer packaging is recyclable, the device components (mask, strap,
controller, power supply and connecting cables) are not and should
not be disposed of in household waste, see section 8.2 on Disposal for
more information.
Action
Plug in the controller to the
charger making sure that the
connections are attached
and leave charging until the
three indicator LEDs on the
controller remain lit and DO
NOT flash
Unplug USB connector from
controller
Return to your supplier
Ensure the controller and
Omnilux Clear device are
connected correctly
12
11.0. Technical specification
Model Number [REF]: TN2112
•
Program time: 10 minutes +/- 11 Seconds
•
•
Wavelengths: 630nm and 415nm +/- 10nm
•
Maximum Output intensity 44 mW/cm
•
Operating Temperature: 0°C to 30°C
•
Storage and Transport Temperature: -5°C to 55°C
Operating Humidity: 30% to 95% without condensation
•
Storage and Transport Humidity: 20% to 85% without condensation
•
Electrical Input from power supply: 100-240Vac, 50/60Hz. 0.25A
•
•
Electrical Output; 5V, 1A
•
IP22
2
13
