clearer in the recordings. Use the navigation keys to turn the mode on or off.
12. Fatigue alert - a warning beep at a user-set interval. Use the navigation
keys to adjust the preferred interval from those available: off/1 hour/2
hours/4 hours.
13. Language - possibility to change the language of the menu. Use the naviga-
tion keys to adjust your preferred language.
14. Frequency - 50Hz / 60Hz refresh rate - 50Hz is the recommended setting.
Use the navigation keys to adjust the preferred setting.
15. Date/time - date and time settings. Use the navigation keys to adjust the
date and time.
16. Date stamp - on/off - function for displaying the date on recordings. Use the
navigation keys to enable or disable the function.
17. Default settings - restores the default settings on the device.
18. SD format - format the micro SD card. Use the navigation keys to format the
micro SD card.
19. Version - displays the current software version of the device.
06. APPLICATION FOR PLAYBACK OF RECORDINGS AND ROUTES
To play back the recordings, speed and route of the vehicle, we suggest the PC
programme „GX Player", the installation file of which is automatically saved to any
micro SD card installed in the device.
Instructions: Insert the micro SD card into the device, then start the device. The in-
stallation file of the „GX Player" software will automatically be saved on the memo-
ry card. Remove the card from the device and insert it into the included micro SD
memory card reader, then insert the reader into your computer via the USB port. In
the next step, start the installation file of the „GX Player" programme from the card
and follow the further instructions. In the programme settings, you can change the
language, units of measurement and the type of maps you wish to work with.
07. PRECAUTIONS
1. Do not disassemble the camera yourself or interfere with its construction. In
the event of a malfunction, contact the service department.
2. Use only original accessories.
3. Only use the original charger supplied. The use of any other power supply
may adversely affect the performance of the device, battery or GPS module.
4. The device may not be used in contravention of the laws of your country
or region.
5. Permissible operating temperatures are 0-35 °C
6. Do not subject the device to damage or impacts.
7. Take care of the cleanliness of the product, especially the lens. Do not use
detergents or chemicals when cleaning.
16
8. Clean only when the unit is unplugged.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you smell burnt plastic or electronics from the camera, unplug the unit as
soon as possible and contact service.
08. FAQ
1. Device does not switch on, screen flashes
Before starting up, charge the unit's battery and check the connection in the
cigarette lighter socket.
2. Device does not switch on/off automatically
The reason for this behaviour may be the constant power supply in the
cigarette lighter socket.
3. Camera stops recording / does not overwrite recordings
Check: G-SENSOR - a function by which recordings with recorded overloads
(e.g. uneven pavement, braking, driving off a kerb or over a speed bump,
etc.) are protected from being overwritten. If you use this function, you must
periodically format the memory card on your computer and then on the
camera. Ultimately, each file on the data carrier will be protected from being
overwritten and the device will not be able to record a further route - it will
not record in a loop. We suggest setting the sensor according to your driving
style and road conditions. You can also disable the option completely, in
which case each oldest file will be overwritten and the card will not need to
be formatted periodically. After adjusting the function, remember to format
the memory card.
4. Camera switches on and off
Check: PARKING MODE/MONITOR and MOVEMENT DETECTION - function
designed to operate while the vehicle is parked. Deactivate the function,
before setting off, as it may cause the camera to switch on and off and make
random fragments of the route recordings. If the functions are disabled,
check if the fault occurs without the memory card inserted.
5. Camera records parts of a route/randomly ongoing recordings
Check: MOVEMENT DETECTION - a function designed to operate while the
vehicle is parked.
You need to deactivate the function, before setting off, as it can cause the
camera to switch on and off and make random fragments of route recordin-
gs. If the function is deactivated, check if the fault occurs without a memory
card inserted.
6. Device shows „card full" message or does not read the card
Check the „G-sensor" and „parking mode" functions and set them to mini-
mum. The card must be formatted in the computer in the FAT32 or exFAT file
17
