Cleaning And Storage; Technical Specifications - JOCCA 6155R Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
14-E
backward, if you keep the correct position mentioned before.
BEFORE USING THE DEVICE MAKE SURE THAT ALL THE SCREWS
ARE PROPERLY TIGHT.
INSTRUCTIONS FOR USE
-This pedaler has 4 different functions:
TIME: Counts the effective exercising time.
COUNT: Laps of the exercise done.
CAL: Calories burnt during the exercise.
TTR: Total of laps, from the first exercise done with the device.
-Before starting the exercise, place the device on a flan surface and
adjust the pedaling resistance according to the strength desired for the
exercise. In order to obtain more resistance, turn the dial counter-
clockwise.
1.-Press the red button located in the counter (G) or start pedaling.
In this way the counter (G) will be started.
2.-To check the results obtained with the exercise read carefully the
following procedure:
*Automatic mode to see the results:
-Press the red button once. "SCAN" will flash. All the obtained results
(TIME, COUNT, T-COUNT, CAL) will be displayed. They will appear
for 4 seconds approximately.
*Manual mode to see the results:
-In order to set the function you want to see during the exercise, press
the red button several times until the desired function appears in the
screen ( TIME, COUNT, TTR, CAL).
NOTE: To set the counter to "ZERO" . Press the red button for some
seconds.
All the indicators will be set to "0", except for the "T-
COUNT".
3.-Batteries replacement: Remove the (G) counter fro its original
position using the three notches located around the counter. You will
reach the battery cabinet and there you can replace it without using
any tool.

CLEANING AND STORAGE

-Clean the device using a wet cloth first and then with a dry cloth.
-Store the device in a dry place.

TECHNICAL SPECIFICATIONS

3V DC (1 x CR2032 3V)
1,5V DC (1xAAA 1,5V)
This device meets the specifications of the Low Voltage Directive
2006/95/EC and of the Electromagnetic Compatibility Directive
2004/108/EC.
PROTECTION OF THE ENVIROMENT – DIRECTIVE
2002/96/EC
This product has been designed and manufactured with high quality
materials and components that can be recycled and reused.
When you see the symbol of a crossed out litter bin on whe-
els next to a product, this means that the product conforms to
the European Directive 2002/96/EC.
Please obtain information about the local recycling system for
electric and electronic products.
Follow the local rules and do not dispose of used products by thro-
wing them in the normal bins at home. Proper recycling of your used
product will help avoid negative impacts on the environment and peo-
ple's health.
E-15

Hide quick links:

Tabla de contenido
loading

Tabla de contenido