Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A
411WARNING:
Only use brushcutter
at-
tachments
that provide
a metal
shield
with
proboscis
nose.
FrOo OSS,S
• Use only specified
blade and make sure it is
properly
installed and securely
fastened,
• Out from your left to your right.
Cutting on
the right side of the shield will throw debris
away from the operator.
• Always
use the handlebar
and a properly
adjusted shoulder
strap with blade (see AS-
SEMBLY
instructions
in brushcutter
attach-
ment instruction
manuat).
CULTIVATOR
SAFETY
WARNING:
Rotating tines can cause
serious
injury. Keep away from rotating tines.
Stop the engine
and disconnect
the spark
plug before
unclogging
tines
or making
re-
pairs.
A
411WARNING:
Inspect
the area to be
cultivated
before starting the unit. Removeall
debris
and hard and sharp objects
such as
rocks, vines,
branches,
rope, string, etc.
• Avoid heavy contact
with solid objects that
might stop the tines.
If heavy contact
oc-
curs, stop the engine and inspect the unit
for damage.
• Never operate the cultivator without the tine
cover in place and properly
secured.
• Keep the tines and guard clear of debris.
• After striking a foreign
object, stop the en-
gine, disconnect
the spark plug and inspect
the cultivator
for damage,
Repair before re-
starting.
• Disconnect
attachment
from the drive en-
gine before cleaning
the tines with a hose
and water to remove any build-up.
Oil the
tines to prevent rust,
• Always
wear
gloves
when
servicing
or
cleaning
the tines.
The tines become very
sharp from use.
• Do not run unit at high speed unless culti-
vating,
HEDGE
TRIMMER
SAFETY
_DANGER:
RiSK
OF
OUT;
KEEP
HANDS
AWAY
FROM
BLADE
-
Blade
moves
momentarily
after
the trigger
is re-
leased.
Do not attempt to clear away cut ma-
teriai when the blade is in motion.
Make sure
the switch
is in the OFF position,
the spark
plug wire is disconnected,
and the blade has
stopped
moving
before
removing
jammed
material from the cutting blade. Do not grab or
hold the unit by the cutting blade,
Blades move
momentarily
after the
dtrigger is
Allow blades to stop
before removing
them from the cut.
,_ WARNING:
Inspectthe areabefore
starting
the unit. Remove
aH debris and hard
objects
such as rocks, glass, wire,
etc. that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during operation.
• Do not use a cutting
blade that is bent,
warped,
cracked,
broken
or damaged
in
any other
way.
Have worn or damaged
parts replaced
by your authorized
service
dealer.
• Always
keep
unit
in front of your
body.
Keep atl parts of your body away from the
cutting
blade.
• Keep the cutting blade and air vents clear of
debris.
POLE
PRUNER
SAFETY
_WARNING:
The reciprocating
blade/
rotating chain
can cause severe
injury.
In-
spect the unit before use. Do not operate
unit
with a bent, cracked or dull blade or dull chain.
Keep away from the blade/chain.
_, WARNING:
The
reciprocating blade/
rotating chain is sharp.
Do not touch.
To pre-
vent serious
injury, always
stop engine and
ensure blade/chain
has stopped
moving, dis-
connect
spark
plug, and wear gloves when
changing
or handling
the blade or chain.
_L, WARNING:
A coasting
blade/rotat-
ing chain can cause injury while it continues
to
move
after the engine is stopped.
Maintain
proper control of the unit untit the Made/chain
has
completely
stopped
moving.
Keep
hands,
face and feet at a distance
from all
moving parts.
Do not attempt to touch or stop
the blade or chain when it is moving.
41_I, W ARNING:
Falling objects can
cause severe head injury. Wear head protec-
tion when operating this unit with a pole prun-
er attachment,
5
Tabla de contenido
