Camera.function; Switching On And Off; Wireless Remote Control - JabloCom EYE-02 Instrucciones De Uso

Plug the power cable into the camera.
• Enroll your mobile phone to the camera.
Call the camera number from
your mobile phone.
3. CAMERA FUNCTION

3.1 Switching ON and OFF

To switch the camera on, press and hold the power button on the back panel of the camera. Keep holding the button
until the green light on the front panel switches on. The start-up process has started and you can release the button.
The camera also starts up automatically after it is connected to the AC adaptor or to a PC via a USB cable.
To switch the camera OFF, switch the camera to CONFIG mode and press the power button
one second. The camera emits a beep. When the green light on the front panel switches off, the camera is shut down.
Whenever the camera is expected to be switched off for a long period of time or for transpor-
tation, it is strictly recommended that the backup battery is removed from the EYE-02 camera.

3.2 Wireless Remote Control

The package contains a wireless remote control (RC-86 type), which
can be used to switch between camera modes.
Changing a mode by using the remote control is signaled both by the
LED lights on the camera front panel, and by an acoustic signal.
EYE-02.ENG.MAN.User_Manual.23.C
Plug the power adaptor into a wall socket.
The camera will automatically switch on.
Wait 30 seconds and check the EYE-02 camera LED lights on the front panel.
On the remote control, press the
- 5 -
button.
on the back panel for
Remote control
EN
ES
DE
FR
NO
FI