Idiomas disponibles
Idiomas disponibles
PROBLEM
The brushroll motor is
overheated.
Brushroll does
not turn.
The belt is not routed correctly.
Fault in PCB section of the
motorized nozzle.
incorrectly.
Sound changes.
Air path is blocked.
Accessories in use restrict air
The power cord plug is loose
from the outlet when using the
vacuum.
Vacuum turns
off on its own.
Thermal protector is activated.
The motor is damaged.
POSSIBLE CAUSE
Turn off and unplug vacuum cleaner.
Check and clear the air path to make
sure it is free of obstructions. Check
and change the dust bag if full. Then
plug in vacuum and turn it on.
Call 1-866-384-8432 for assistance.
Call 1-866-384-8432 for assistance.
instructions on page 22.
Check for and remove any clogs and
clean the air path. Follow instructions
on page 23.
Check accessories for fuzz, lint, pet
hair or other debris.
Reinsert the power cord plug fully into
the outlet. Avoid pulling or dragging the
power cord when using the vacuum.
Turn the vacuum cleaner off and
unplug it. Check the air path and dust
bag. Allow the vacuum cleaner to cool
for a minimum of 50 minutes. Plug in
vacuum and turn it on.
Call 1-866-384-8432 for assistance.
-27-
SOLUTION
