en Original operating instructions
WARNING Please read all instructions on
safety and proper use.
Failure to observe these instructions on safety
and proper use could lead to electric shocks, fires
and/or serious injury.
All instructions on safety and proper use must be
kept for later use.
1
General information ......................................... 7
1.1
Intended use..................................................... 7
1.2
Safety instructions and warnings.......... 7
1.3
Battery directions of use............................. 8
1.4
Key to pictograms .......................................... 8
1.5
Technical data.................................................. 9
2
Scope of supply ............................................... 89
3
Standard operation ........................................ 90
3.1
Fasten belt hooks ........................................ 90
3.2
Open the magazine.................................... 90
3.3
Insert fasteners ............................................. 91
3.4
Depth setting ................................................ 92
3.5
Parallel stop.................................................... 92
3.6
Insert battery................................................. 92
3.7
Unlocking function mode, firing a shot
.............................................................................. 93
3.8
Remove battery ............................................ 95
4 Troubleshooting ............................................. 96
4.1
Remove jam ................................................... 96
4.2
LED error display .......................................... 97
5
Spare parts list/accessories .......................... 98
General information
J-550 / J-551
Intended use
1.1
This device is used to attach cardboard, insulat-
ing material, textiles, films, leather, wood and
other similar non-brittle materials to wooden or
wood-like surfaces. Please take care to ensure
the workpiece is of a suitable size.
The device must only be used for the purpose in-
tended by the manufacturer.
The 031-0367 battery packs are designed for use
in the corresponding NOVUS battery-operated
power tools. They must only be charged using
Novus chargers. Battery packs marked with CAS
are 100% compatible with CAS (Cordless Alliance
System) devices. To select the appropriate device
please contact your dealer. Read the relevant op-
erating instructions for the devices used. For ex-
ample, the charging process is displayed on the
charger; for details, see the operating instruc-
tions for the charger. The user bears sole re-
sponsibility for any damage caused by improper
use. Generally accepted accident prevention re-
quirements and the supplied safety information
must be observed.
1.2 Safety instructions and warnings
This device has been constructed and tested in
accordance with all currently applicable tech-
nical regulations. It left the factory in perfect
condition in terms of safety and reliability. To
keep it in such a condition and to ensure risk-free
operation, the user must observe the instruc-
tions and warnings given in the operating in-
structions.
• The device is not suitable for industrial use.
• The device is not a toy and must be kept away
from children at all times.
• Check the device every time to ensure that it is
in good condition before putting it into opera-
tion.
• If it must be assumed that safe operation is no
longer possible, take the unit out of operation
and secure it against accidental use.
7 / 100