Kohler Sonata K-1508 Guia De Instalacion página 6

2. INSTALL
MODULE
Install the drain to the module
according to the drain
manufacturer's instructions.
Lay out and mark the location
of the mixing valve, shower, and
bath spout holes on the back
surface of the module wall. Drill
1/4" (6mm) pilot holes at the
marked locations.
Use a drop cloth or similar
material to protect the bottom
surface of the module.
From the inside of the module
(finished surface), use a hole
saw of the correct diameter to
carefully drill the fitting holes.
Clean the module to reduce the
risk of surface damage.
A
1010410-2-
6
Kohler Co., Kohler, WI U.S.A.