Idiomas disponibles
Idiomas disponibles
MAINTENANCE
_
_//
SCHEDULE
Check EngineOil Level
I_
I_ !
Change Engine Oil
I_1 _
Oil Pivot Points
I_
InspectSpark Arraster/ Muffler
V'
InspectAir Screen
V /
Clean or Release Air Cleaner Cartridge
_2
Clean Engine Cylinder Fins
I_
Replace Spark Plug
I/
RH Gear Case Grease Fitting(1oz.)
I/
1 - Change morn o_tenwhen operating under a heavy load or in high ambient lempem_.
2 - Sei_Ice morn often when operating in dirty or dusty co_d_ons.
LUBRICATION CHART
GENERAL
RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to
operator abuse or negligence.
To receive
full value from the warranty, the operator
must maintain tiller as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tiller.
All adjustments in the Service and
Adjustments section of this manual
should
be checked
at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check tines and belts for wear.
A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE
EACH
USE
1. Check engine oil level.
2.
Check tine operation.
3.
Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART').
* Throttle Control
** Engine
***RH Gear Case
Grease Fitting
Stake Pin
Shield
Hinges
* Idler Bracket
* Wheel Hub
SAE 30 OR 5W-30 Motor Oil
** Refer to Maintenance "ENGINE" Section
*** EP #1 Grease
13
