Idiomas disponibles
Idiomas disponibles
to the direction of the appliance, as shown in figure 2. Once you hear a click, make sure the
handle is fixed in place to ensure it was correctly installed.
-
If you wish to remove the handle from the body, press the release hole with a thin object
while pulling the handle from the body.
Assembling and disassembling the water tank. Fig. 3
To remove the water tank, hold the body of the appliance with one hand, hold the handle of
the tank to be removed with the other hand, and press the water-tank release tab to remove
the tank.
To re-install it, first place the bottom of the tank against the edge of the tank bracket and press
the tank into position. You will hear it click into place if correctly installed.
Assembling and disassembling the waste-water tank. Fig. 4
To remove the waste-water tank, press the release tabs and pull the cover upwards. Once the
cover is removed, pull out the waste-water tank as shown in Figure 4. To reattach it, align the
clips at both ends of the cover, then press the assembly together until it clicks into position.
Filling up the water tank. Fig. 5
1.
Remove the water tank as explained in the previous section.
2.
Place the tank horizontally, open the cap, and pour clean water up to the marked line.
3.
Make sure the tank is tightly closed to avoid spillage.
4.
Install the water tank on the appliance's body as explained in the previous section. You
will hear it click into place if done properly.
Warning
This appliance was designed to work with both distilled and tap water. Please note that the
latter may lead to limescale deposits, which in turn can clog the appliance.
The maximum filling capacity of the water tank is 420 ml. Do not exceed the marked line when
filling.
Installing and removing the rotary brush. Fig. 6
To remove the rotary brush, press the release tab at the bottom, lift the tab holding the brush,
and remove the brush as shown in Figure 6. To re-install it, follow the reverse procedure.
4. OPERATION
Using the electric mop
1.
Press the power button to turn the appliance on. The appliance regulates the amount of
water required for cleaning by default.
2.
Press the Spray button to increase water output frequency.
ENGLISH
37
FREEGO WASH
