Idiomas disponibles
Idiomas disponibles
EN
¡IMPORTANT! Keep these instructions for
future reference
WARNING! Never leave your child unattended.
WARNING! Ensure that all the locking devices are
enganged before use.
WARNING! To avoid injury ensure that your child is kept
away when unfolding and folding this product.
WARNING! Do not let your child play with this product.
WARNING! Use a harness as soon as your child can sit
unaided.
WARNING! Always use the restraint system.
WARNING! This product is not suitable for running or
skating.
Suitable for children under 6 months old only with
accessories approved by BE COOL.
This pushchair may only be used by one child at the
same time.
The maximum load carried in the basket must never
exceed the limit indicated on the basket (4 kg).
Take care when going down escalators as the rear
safety catch may come undone.
The parking device shall be engaged when placing and
18
removing the children.
Any load attached to the handle and/or on the back
of the backrest and/or on the sides of the vehicle will
affect the stability of the vehicle.
Only replacement parts supplied or recommended by
BE COOL shall be used.
WARNING: Move the position of the harness according
to the child's age and use the lowest, tightest position
for children under 6 months old.
"This vehicle is intended for children from 0 months up
to 22 kg or 4 yeard old (whichever happens first). "
WARNING: Never use the strap between the legs
without using the lap belt.
COMPLIES WITH EUROPEAN SAFETY STANDARD EN
1888-2:2018 +A1:2022.
WARNING! Check that the pram body or seat unit or
car seat attachment devices are correctly engaged
before use.
INSTRUCTIONS FOR ASSEMBLY AND USE
1. OPENNING THE CHASIS
1a. Lift up the handle until clear "click" sound.
1b. Pull the handle-bar backwards until "click" sound.
1c. The chasis will be opened.
2. ASSEMBLING THE FRONT WHEELS
2a. Connect the front wheels with the stands on the bothsides
as the arrow directions.
2b. Press down the metal button on the stands to release the
front wheels
2c. Lift up the swivel-lock button to close the swivel-function.
2d. Press down the swivel-lock button to enage the swivel-
function.
3. ASSEMBLING THE REAR WHEELS
3a. Connet the rear wheels with the stands on bothsides as
arrow directions.
3b. Press down the metal buttons on the stands of bothsides to
remove the real wheels.
4. APPLYING THE BRAKE
4a. To engage the brake: step down the brake pedal as photo.
4b. To release the brake: kick forwards the brake pedal as photo.
5. FITTING AND REMOVING THE HAMMOCK
5a. Rotate the carrying handle as arrow direction until "click"
sound (this operation is only necessary for new chasis from
the packing ).
5b. Open the seat towards bothsides until "click" sound as photo
"shown".
5c. Aim the connectors on the bothsides of hammock at the
stands on the bothsides of chasis and press down the
hammock until "click" sound ( A_ show the connetion clearly).
5d. Lift up the hammock triggers on bothsides and hold the
hammock up to remove it.
5e. Connect the bumper bar with the hammock as arrow
directions
5f. Press down the buttons to take the bumper bar off.
5g. Press down the buttons on bothsides to adjust the footrest
upwards or downwards.
5h. Pull upwards the backrest trigger to adjust the backrest
positions as you want.
5i . Press upwards the handlebar button to adjust upwards or
downwards the height of the handlebar.
Note: This hammock is reversible, so it can be facing you or
forwards.
6. FOLDING THE PUSHCHAIR
6a. Furl the canopy as arrow direction .
6b. Pull upwards the backrest trigger and push the backrest
forwards to fold the hammock first.
6c. Press down the safety lock with your thumb and then press
down the handlebar button with your other fingers and
push the whole hanelbar downwards swiftly to release the
handlebar lock. the handle will drop down.(A_will show the
safety lock and hanelbar button clearly)
6d. Lift up the carrying handle, then the pushchair will be folded
EN
19
