Idiomas disponibles
Idiomas disponibles
When connect to an ac�ve 2.0 speaker system, it works as Line
Output.
(See fig.1
below).
2. PC input
Connect to computer or MP3 player or other audio sources.
(See fig.1
below).
3. Subwoofer Level (Volume)
Match the subwoofer's output level to your satellite speakers' output
(if used).
4. Crossover Frequency
Controls the high frequency cutoff point. Rotated fully clockwise, it
cuts high frequencies above 150 Hz. Rotated fully counterclockwise, it
cuts high frequencies above 35 Hz.
5. Phase (Polarity) Switch
Inverts the subwoofer's output polarity so you can set it to match the
main speakers.
6. High Level Input
If your amplifica�on system does not have a dedicated subwoofer line
output, your subwoofer must be connected via the high level
terminals on the rear panel. Connec�on should be made from the
speaker terminals on your amplifica�on system to the High Level Input
Connec�ons (see fig.2 below).
7. Power indicator
Lights when the subwoofer is
powered.
8. Power Switch
Turns the subwoofer on and off.
