Idiomas disponibles
Idiomas disponibles
3. SMART CHARGING SYSTEM
The Smart Charging System uses power sensors and charging logic to deliver the fastest and most
efficient charge possible. The system automatically evaluates the power draw from each outlet,
routing power to the outlets with the greatest demand first and charging as many devices as possible
simultaneously from a single 15A outlet.
1
Power LED
2
Automatic charging mode (Default)
3
Charging method
4
Auxiliary power supply
Led display for the visualization of the
5
electric current
State of charge of the 8 devices con-
6
nected in the first area.
State of charge of the 8 devices con-
7
nected in the second area.
State of charge of the 8 devices con-
8
nected in the second area.
State of charge of the 8 devices con-
9
nected in the fourth area.
10
Extra charging
When the power is on, the light is green.
When this function is active, the device will
automatically select the plug to be turned on
according to the need. When charging is comple-
te, it will automatically turn off. In case of a new
recharge, the start button must be pressed.
if it is necessary that all the sockets are still
switched on even after charging is complete,
press the button. Automatic control of the power
supply see point.
If you need to charge only one device or a large
device, press and hold the button for 3 seconds,
only the connected plug will remain active and
all the rest will turn off.
When the light 1 to 5 flashes, the screen shows
the current of the flash light socket.
The light shows the charge status of the 8 con-
nected devices in the first area.
The indicator shows the charge status of the 8
connected devices in the second area.
The indicator shows the charge status of the 8
connected devices in the third area.
The indicator shows the charge status of the 8
connected devices in the fourth area.
In case you need to charge multiple devices.
ENG
5
