Electrical Connection - De Dietrich AD279 Manual Del Usuario

1.3 Attachment
Carefully release the lugs on the front panel from the
ribs in the box using a screwdriver.
Remove the cover.
1.4

Electrical connection

Use wires with a cross section of between 2 x 0.75 and 2 x 1.5 mm².
Connect the 2 wires to the terminal block.
To access the connection terminal block in the appliance's
control panel, refer to the instructions for the appliance.
Under no circumstances must sensor cables (very low
voltage) be placed in cable ducts or channels carrying
cables supplying 230 V. Furthermore, a minimum distance
of 10 cm should be kept between cables supplying very
low voltage and cables supplying 230 V.
10/01/11 - 300017411-001-B
Ø 6mm
3
Drill 2 holes with a Ø of 6 mm. Put the plugs in place. Secure the
box using the 2 screws provided.
AD244 - AD279
2
O N
1
O N
7