Idiomas disponibles
Idiomas disponibles
Advanced Temperature Regulation (ATR) technology: ATR automatically
reduces the brightness level when the driver temperature reaches 60°C to
prevent overheating
Low voltage warning
Power Indicator
The LED indicator in the side switch shows the power status for 5 seconds after
turning HD15 on.(Power LED indicator shows at one side of the switch)
Green = remaining battery power is good (more than 30%).
Red = remaining battery power is poor (less than 30%).
Flashing Red = critical power, replace or recharge battery as soon as
possible.
Low Voltage Protection: If the battery's voltage is lower than 2.7V, HD15 turns
off automatically to avoid battery damage by overdischarge.
Recharging & Powerbank Feature
HD15 has a USB-C port for convenient recharging of its battery. Please connect it
with the supplied USB-C cable and use a USB power adapter. You may use any
other USB-C cable for charging - both type A-C and type C-C cables work.
HD15 is also able to work as a powerbank, charging external USB-devices from its
internal battery. Please note that depending on the external device you may
need a different USB-cable (e.g. C to C or C to microUSB or C to Apple Lightning)
than the one supplied with HD15.
Charging/Reverse Charging Indicator (LED indicator shows at the switch):
Charging = Flash RED; Full Charge = Green
Reverse Charging/Powerbank = Green
It will Flash RED when the power is not enough to support discharge and turn off
discharge
When remove USB cable indicator will turns off automatically.
Getting started
Before using the flashlight, unscrew the tail cap, remove the battery and remove
the insulating plates on the battery's poles. Afterwards reinsert the battery with
the anode side (+) towards the head, then screw the tailcap back on. Now, use
the supplied USB-C cable (or any other USB-C cable) to charge the battery in the
flashlight. Once finished the power indicator will turn green to report a full
battery.
