Idiomas disponibles
Idiomas disponibles
1. Pull out the bucket cover.
• Placethumb at position (_and
pull outward. Placeother hand at
position (_)and pull up.
1. Empty the bucket manually.
2. Clean insideof bucketwith
brush or dampenedcloth.
• We recommendusing a mild
detergentsolution.
Brush or
3.
Replacethe bucket cover.
• Makesure tabs (Dand _)are
placedas shown.
Tab(_
Tab_)
When the bucket is full, pull out
and empty it intoa large sink or tub
and then replace it properly.
• Do not overtighten the hose when
connecting it to the bucket. Use a
rubber washer and tighten by
hand firmly without stripping the
plastic threads.
• Be careful while taking out the
bucket as it can cause damage.
• Please do not shake strongly
when you carry the bucket. It can
cause to breakage of the handle
or bucket cover.
It is advisable to carry the bucket
bysupporting it from the bottom.
2.
Attach a length of garden hose to the threaded bucket drain
hose connection to carry water to the drain.
The bucket has a threaded hose
• When being attached to the
connection which can be left open.
bucket drain hose connection, be
Ddlt a 1/4" (6.4 mm) hole in the
sure the hose doesn't kink or
center of the hose connection,
bend. It should tie flat from the
Once opened, the hose connection
dehumidifier to the drain.
will continually drain water from the . The hose attachment will accept a
bucket.
• The nozzlecannot be fixed after
puncture. Use an ordinary garden
hose cap to reclose if necessary.
• When inserting the bucket into the
unit. lifting up the bottom tip of the
bucket lightly makes insertion
standard garden hose filling. You
can attacha screw-on cap to use
the bucket without a hose.
easily.
f
-8-
