Idiomas disponibles
Idiomas disponibles
Power on the Digital Interface
Congratulations on the purchase of the 8CH-600S, 8CB-600S or 8CN-600S Series Digital Interface.
Before You Install
• After powering on the interface you will experience
a blank screen for approximately 60 seconds.
• This interface is pre-configured to be installed in
landscape orientation. If you prefer to install in
portrait mode, please see the following steps in this
section. Otherwise, these steps can be disregarded.
• To rotate the screen press the SETTING "gear" icon
in the top left corner on main screen.
• In the MAIN SETTINGS, go to DISPLAY.
• Then ORIENTATION.
• Select the desired orientation for your Interface.
The system will then restart.
7
113040 Rev. C
