Beper BP.801 Manual De Instrucciones página 9

5. After a few seconds the display will show the weight. Allow the value to stabilize.
6. Press the "ON / TARE" button to zero the weight and proceed with a subse­
quent weighing. The display will show "0 g".
7. Do not overload the scale. If the display shows the message "O­Ld", it means
that the scale is overloaded. Remove the product to be weighed. Do not weigh
more than 5 kg.
8. To turn off the scale, press the "ON / TARE" button when the display shows
"0 g". The scale will turn off automatically after a few seconds if no command is
received.
CLEANING OF THE SCALE
The scale can be cleaned with a soft cloth slightly moistened with warm water.
Never clean with thinners, abrasive products in general; these could damage the
surface of the scale.
Do not immerse the scale in water.
Protect from liquid infiltration.
Keep hair preparations, cosmetics or bath solutions away from the scale; they can
damage the aesthetic parts and the internal circuit of the scale.
TECHNICAL DATA:
Maximum capacity : 5000 g/ 11 lb
Division: 1 g/ 1 Oz
Power supply: One button­type battery CR2032 (included)
For any improvement reasons, Beper reserves the right to modify or im-
prove the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the
impact on human health and the environment. The crossed out "wheeled
bin" symbol on the product reminds you of your obligation, that when
you dispose of the appliance, it must be separately collected.
Electronic kitchen scale - Use instructions
9
EN
loading