Jata calor Dual-Kherr DK500P Instrucciones De Uso página 14

Idiomas disponibles

Idiomas disponibles

•  The appliance must be placed in such a way that the plug of the 
power cord was accessible. 
•  The appliance could emit a slightly odour and some fume during 
the first few uses. 
•  To unplug, pull from the plug, never from the cable.
•  If the cable were to deteriorate it must be changed by an 
Authorised Service Centre.
ASSEMBLY
• Screw the hooks to towel hanger (3) depending on the position where you want to fix the device, as shown in
Figure 1.
• Fasten the device according to Figure 2:
- A: Separation wall to 3 mm.
- B: Separation wall to 7 mm
• To fix the cable in the appliance you can use the adhesive hooks as shown in figure 4
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Press the switch (1). It will light on and the towel warmer will start to warm up.
• Hang the garments up.
• To turn off the unit, turn the switch off (1), the LED on the switch is off.
TIMER MODE
• With this function, you can program the device to run for a certain time.
• To do this you must press the
device to work. The LEDs illuminate the selected hours.
• Note that the running time is the sum of the hours with illuminated LED.
• Example Figure 3: The unit will operate for a period of 5 hours, then it'll disconnect.
• To deactivate the timer mode repeatedly press the
MAINTENANCE AND CLEANING
• Before you proceed to cleaning it, ensure the towel warmer is unplugged from the mains.
• Clean it with a slightly damp cloth.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of the
appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
button repeatedly to select the hour or combinations of hours you want the
button until the LEDs are off.
14
loading