Idiomas disponibles
Idiomas disponibles
• (*) ATTENTION: Hot surface.
• If the plate is broken, switch off the appliance to avoid risk of
short-circuit.
• Do not place over the plates metallic objects such knifes, forks
and spoons.
• This appliance has been designed for domestic use only.
• VERY IMPORTANT: Do not immerse the main body and/or the
cable cord of the appliance in water or any other liquid.
• To unplug, pull from the plug, never from the cable.
• It is absolutely normal for the appliance to make some smoke
during the first few times it is used due to the coatings used in
the manufacturing process of the product.
• This appliance is not intended for using with an external timer or
a separate system of remote control.
• The cleaning and maintenance done by users, can not be done
by children without any supervision, unless they are over 8 years
and they are under supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• Place the appliance on a flat and heat resistance surface.
• Put the bowl in the centre of the desired plate (2000 or 1500 w).
• Connect it to the network.
• Press the on-off switch (2) to turn on the appliance. The power LED will remain lit and the display will show "on".
If cooking has not started in a few seconds, the appliance will turn off automatically.
• Press Power selection (7) to start heating. If the container is not induction, there is no container or the diameter
is very small, the appliance will detect that the container is not valid and E0 will appear on the display (5),
emitting a sound. After 60 seconds it will disconnect.
• Use the temperature selectors (4) to adjust the temperature from 60 to 240 ºC.
• You can adjust the default operating time by pressing the timer (6) "The display will start flashing. (0:00). Long
press "+ or –" to adjust from 0 minutes to 4 hours. Once the time is set, it will be fixed in a few seconds. The
display will stop flashing.
• To lock the buttons and prevent them from being accidentally activated, press the lock button (3), the display
will show "LOC". To unlock, keep the lock button (3) pressed for a few seconds until you hear a sound and LOC
disappears from the display.
• To turn off the device, press the on-off switch (2) and disconnect it from the mains.
11
